•Fiberglass
•26-gauge stainless steel
•26-gauge white painted galvanized metal
Door Panel Thickness:
•3-6” Thick
Insulation:
•2 lbs / cubic inch foamed in place (FIP) polyurethane insulation
Door Casement Options:
•26-gauge stainless steel clad
•26-gauge white painted galvanized metal clad
•26-gauge mill finished galvanized metal clad
Door Trim:
•Stainless steel
•Galvanized steel
Features:
•Heavy duty hardware and track with corrosion resistant coatings
•Two (2) four-wheel trolleys on each door panel
•All exposed seams sealed
•Door tracks angled down and in for a tight seal
•Floor mounted stay rollers
•120-volt self regulating heater cable on all four sides of doors
Options:
•Jambs
•Inside trim
•Mirrored image header
•Vertical end supports
•Kick plates
•Locking Device
•Vision panel (multiple glass and polycarbonate options available)
Power Operator Options:
•Electric operator with 1/2 hp enclosed 3-phase electric motor with heavy duty gear drive and adjustable torque limiter
•NEMA 4 control box
•24-volt control circuit and adjustable limit switches
•Unit is preassembled and mounted on header
•Full height instant reversing safety edge on leading edge of door panel
•Emergency release manual disconnect
•Pull cord switches
•Push button control
•Radio control
•Photo cell open/close
•Partial opening control
•Closing signal warning control
•Electric interlock
•Header control box
•Time delay close
•Loop detection system
• Manual Operation (CAD)
• Power Operator (PDF)
• Power Operator (CAD)
